Showing posts with label Wiring Techniques. Show all posts
Showing posts with label Wiring Techniques. Show all posts

Sunday, 20 November 2011

WIRING TECHNIQUES


 Introduction:
•         Before you can build or design, you will need to recognize how to use proper wiring techniques in order to start connecting simple circuits.
•         Learning these techniques will ensure that you are following proper electrical safety procedures.
Objective:
Students will be able to:
•         Define different wiring techniques
–       Choose appropriate electrical components.
–       Select proper electrical wire color configurations.
–       Select proper wire connectors for various applications.
–       Complete various electronic projects.
Choosing gauges:
•         The most important wiring practice is to observe proper wiring sizes.
•         Failure to choose the correct size can result in marginal performance of your circuit or even overheating of your wires or connectors.
•         Always use one size larger if possible.
Wire Color Selection:
•         Properly choosing the colors for your wires can help you decipher your wiring configurations.
•         To the right is a picture of a bad configuration and a good configuration.
•         For low DC voltages use the following color codes:
            Black – Negative
            Red  –   Positive
            Green - Ground
Conductors:
•         Conductors are defined as materials that allow the flow of electric current.
•         Metals are usually good conductors while nonmetals are not.
•         The most common conductor used in electrical wiring is copper.
Insulators:
•         An insulator is a material that has few, if any, free electrons and resists the flow of electrons.
•         No material has been found to be a perfect insulator, but common insulators include air, glass, rubber, plastic, paper, and porcelain.
•         An advantage of using insulators in circuits, is that they provide the ability to place wires close together without the risk of a short circuit.
Wire Terminals and “Quick connects”:
•         Terminals are used to safely and easily connect wires to a device or load.
•         They are usually crimped onto the ends of wires, or soldered directly onto the terminal.
Advantages:
Single pole wire connectors
•         Allows a clean connection between the wires.
•         They can be “crimped” on instead of having to be soldered together.
•         You can safely separate the wires without having to cut or splice.
Design Different Connecting Leads:
•         Objective:
–       To learn the different types of connectors available when connecting wires together.
•         Materials:
–       Wires
–       Battery (or power source)
–       Connectors
Self Evaluation Test:
•         Why should we use a wire color code?
–       To identify positive, negative, ground, or any other type of signals.
•         Why do we need to use insulators?
–       To prevent a short circuit connection and to protect you from shock and other safety reasons.
–       Why do we need to use conductors?
–       To connect electricity from one source to other components.
–       To complete an electrical path.
•         What happens to an LED if you connect one lead to an insulator?
Nothing. Electricity doesn’t flow through an insulator.